EverFocus - ED200 Series

Below are all the different types of EverFocus. Select the device of your choice, to download the manual

Contents

4 Wall Mount aim to left Remove the iron case from the supporting bracket by using screw driver to loosen the two screws which connect the iron case to the supporting bracket Turn the iron case in 90 degree and mount into the supporting bracket again by changing the screw holes in order to keep the screw indicator on the top side O Connect the video output of the camera to a B W monitor ED100 or a color monitor ED200 or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension Connect the DC 12V regulated power source to the DC 12V Power in jack with 2mm center l outer plug Put the dome plastic cover back into the Dome Camera IV Specifications ED200 Pickup Device Picture Element ...